Twitter


Cuplock Scaffolding System


Cuplock Mobile Tower Cuplock Scaffolding System

Your quest for superb quality Cuplock Scaffolding System ends at Millennium. We furnish Galvanized Cuplock Scaffolding that is used in large number of industries or varied industrial applications. Manufactured from40 mm NB Pipes along with the cups that are prefabricated at each 500 mm c/c, Cuplock System Scaffolding is highly demanded by our global customers available in the size of 3.0, 2.5,2.0,1.5,1.0, cuplock system is can be availed at most competitive prices of the industry. Also, we provide availability in custom-built specifications.

Scaffoldings (On Sale/ On Rental)
Steel Scaffolding has now a days became the most popular, safe, fast and economical method used in construction industry. There are various different systems of scaffolding since inception. I would brief some of them over here.

Bamboo (Wooden) System Scaffoldings
Conventionally, BAMBOO system was introduce for the scaffolding purpose. The system was well running and still it is used at some sites in the market. There are many reasons for cut down of usage of this system. Now a days the construction has gone to peaks. There are many high rise buildings, so there this system has shown found little bit risky. And even government has also banned this system as scaffolding at their sites, only due to risk involved in it. Secondly it takes lot of time for erection & dismantling. Thirdly, the labour cost increases due more time. Fourthly, you required special labourers for erection & dismantling and Finally, on the whole in this system the safety norms are not covered much.

Pipes & Couplers
This system was introduce to overcome the difficulties faced in the bamboo system. Due to this system the risk factor has reduce to some level. The system consist of one vertical pipes is to be clamped with one horizontal pipe with the help of couplers. But the drawback of this system was that if the clamps are not tied or fixed properly, then there were chances of accident at times. So, system did not captured the market for longer period.

‘H’ Frames System Scaffolding
This system was designed in such a way that the problems faced in the above was eradicated due to its prefabrication of horizontal and vertical pipes. There are no clamps required to fix it up. Hence the risk factor is reduced a lot. Secondly, the erection speed is increased as less no. of pipes are to be fixed up rather than PIPES & COUPLERS. Thirdly, during special heights, this scaffolding erection becomes very much risky as the whole weight of ‘H’ is heavy and it is difficult to fix it up at heights.

Cuplock System Scaffoldings
The latest and the best option available in the market is CUPLOCK system of scaffolding. It is the safest system of scaffolding at present. It is made out of 40 mm NB scaffolding pipes with special designed cups fabricated at every 500 mm to get optimum strength and support. CUPLOCK system is very versatile in erection & dismantling. You can erect in whatever pattern you want. The cuplock system can be erected in circular way also. The material here in this system in single pipes only, so it is very easy to transport, transfer and erect. It requires less space for storage, no loose members are there which gets misplaced, the locking system here is such designed that no chances of accidents. The life of scaffolding is very long. We can say it pays back in long run.

Our Product Range
Cuplock scaffoding,"H" frames, Accessories like Fix, Swivel, Sleeve, Putlog, Staircase, Girder, Gogo, etc.., Joinpin, Spigot Pins, Base plates, Universal jacks, Stirrup head, Props, Spans, Forwork components & its accessories & Concrete hardwares like floor forms, Wall Forms, Soldiers, Tie rods, Weidge & clips, Single clips, and many more.



Scaffolding Products
  • Cuplock Scaffolding
  • Scaffold with Timber Decking
  • Access Scaffold
  • Cuplock Standard
  • Cuplock Standard : Made out of 40 mm NB Pipes with cups prefabricated at every 500 mm c/c.
    Sizes(In Mtr): 3.0, 2.5,2.0,1.5,1.0, (Custom Sizes Made as per Requirement).
  • Cuplock Ledgers : Made out of 40 mm NB Pipes with blades prefabricated on both the edges.
    Sizes(In Mtr): 2.5,2.0,1.5,1.25,1.2,1.0, (Custom Sizes Made as per Requirement).
  • "H" Frame Scaffolding : Consists of two Verticles Tubes of 40 mm NB welded with two horizontal tubes braced together with scissor type cross braces secured by clips. Bracing is provided in alternate bays for scaffold heights upto 20 mtr and in all bays for hreater heights. ‘H’ frame with 50 mm NB Verticals are available for staging of heavier structures.
    Sizes(In mm): 2000 x 1250,1500 x 1250, 1000 x 1250.

Product Features








Specifications

Adjustable Telescopic Props

Steel Props are made from continuous welded steel tubes.

Inner Tube : 48.3 OD
Outer Tube : 60.3 OD

SIZES HEIGHT (IN MTR)   SAFE AXIAL LOAD (KGS)  
  Closed Extended Closed Extended
0N 1.10 1.75 3500 3000
1N 1.50 2.75 3200 2300
2N 2.00 3.25 3000 2200
3N 2.00 3.75 2900 2000
4N 3.00 4.65 2300 1150

Adjustable Telescopic Spans

Adjustable Telescopic Spans

Advantages of Cuplock Scaffolding

  • Quick fastening of horizontals. Four horizontals can be fastened at one time with firm clamping action of top cup making the joint rigid.
  • Quick erection and dismantling results in time and labour saving.
  • Versatile use in construction, demolition or maintenance projects for any type of structure i.e. straight or curved.
  • Easy erection with no loose components.
  • Lightweight but high loads carrying capacity up to 57 KN per vertical.
  • Low maintenance.
  • Safety with proven track record.

 

Speed of Erection Cuplock Provides major savings in erection and dismantling times thus minimizing on site cost. It can be erected 75 faster than traditional scaffoldings. When not in use, its modular constructions ensure minimal space requirements for storage. Simplicity and Strength The success of cuplock lies in the node point or fastening method. Four horizontal can be fastened at one time making a very rigid connection. The horizontal bear directly on the verticals and are firmly clamped by the action of the cup. There are no loose parts to lose. The rigid node point allows for high horizontal loads experienced with a 57kN leg load. Versatality When investing in equipment's it must be as versatile as possible. Cuplock can be erected for straight, curved and circular configuration for both access and support, and for independent and mobile towers. Durability With no loose parts and with corrosion protection it can be easily stored and maintained. Designed to be tough, cuplock is highly resistance to damage. When not in use, it's modular construction ensure minimal space requirement for storage.

 

To enquire about the desired product(s), just check the box and then click “Enquiry Now” button which is provided below.