We are one of the major manufacturers and exporters of Ceramic Fiber Module. Our Ceramic Fiber Module is made from ceramic fiber blanket folded under compression to form folded module and / or pre-cut blanket stack-bonded to form a veneer module with cut edges exposed.
Characteristics :
- Low thermal conductivity
- To be secured by concealed anchor
- Greater mechanical strength
- Resistance to gas flow erosion
- Shorter heat up and cool down time
- Resilience and resistance to thermal shock
- Flexible and easy to cut and install
- Asbestos free
Applications :
- Iron and Steel : Reheating furnace
- Multi and single stack coil annealing furnace
- Transfer ladle lids
- Continuous annealing and coat ducting furnaces, roll furnace
- Petrochemical : Reformers, Ductwork pyrolysis heaters
- Ceramic : Shuttle Kiln, Tunnel Kiln, Kiln cars
- Utilities : Waste heat recovery units, Combustion Chambers, Boiler ductwork
Specifications :-
| Grades |
(1) Cera, Standard
(2) Cerachem, Zirconia |
| Classification Temperature(oC) |
(1) 1260
(2) 1425 |
| Thickness |
1) 150,200,250,300
2) 200,250,300
Other thickness on request |
| Dimensions (mm) |
(1) & (2) 305 x 305 |
| Density (kg/m2) |
(1) & (2) 128, 160, 190 |
| Thermal Conductivity (W/mK) (at mean temperature of 600oC depending on density ) |
(1)0.149
(2)0.139 |
| Application Areas |
High Temperature Furnace, Kin, Fired Heater linings where modular construction is preferred. Quick installation and easy maintenance are the advantages of using modules. Used for Lining at Shuttle & all type of k |
|
